15/30
ALFA IN a.s ©
www.alfain.eu
In general, the current set of consumables lasts an average of 1 to 3 hours of
cutting (ignited arc). Under normal conditions, the nozzle wears first when cutting
by hand, the electrode lasts about half as long as once.
When replacing o-ring 5790, lubricate the o-ring area with lubricant 7101.
HOW TO CHOOSE THE RIGHT CONSUMABLE PARTS
Torch SVH-105 use the same consumables that are protected, so the nozzles
can be pulled over the cut material.
For the best cut quality, it is necessary to use suitable sets of consumable
parts. The individual assemblies by power and type, including order numbers,
are listed in the table below.
NAMES OF SVS BURNER PARTS
Nozzle Nozzle body Cutting tip
Diffuser
Electrode
O-ring
5790
Head
Position tube
Torch SVS-105
