SV SLA-PA201 Manual Download Page 9

Page: 9 / 88

When running ‘FirmUp1.0_ENG.exe’ file on PDA, the program runs like [Fig. II-3-5]. Press

[Open] button on the window of [Fig. II-3-6]. Select folder and file (*.bin) to update and press [Open]

button on the window of [Fig. II-3-7].

[Fig. II-3-5] FirmUp window

[Fig. II-3-6] Open a file to update

[Fig. II-3-7] Completion to open a file to update

At [Fig. II-3-7], press [Start] button to start update. You must insert front-end H/W before update. It

is highly recommended to use AC adaptor or USB cable, but not to use PDA while updating. It is very

harmful that H/W is removed from CF card slot or shut down compulsorily while updating. If it

causes, you can’t to update it and the hardware has to be repaired.

You must turn off PDA after finishing upgrade(Or remove hardware from PDA and then insert

hardware again).

Attention before updating firmware!

1. Use of AC adaptor or USB cable is highly recommended.

It is very harmful to use PDA while updating.

If the firmware upgrade is failed, the hardware can’t be used anymore and must

be repaired.

Attention after updating firmware!

1. Turn off the power of PDA, and then Turn on.

Summary of Contents for SLA-PA201

























































































Search results

Summary of Contents for SLA-PA201

Reviews:

Related manuals for SLA-PA201

Brands by name

Popular brands

SV SLA-PA201, Manual

Search results

Summary of Contents for SLA-PA201

Reviews:

Related manuals for SLA-PA201

Brands by name

Popular brands