SV SLA-PA201 Manual Download Page 11

Page: 11 / 88

[Fig. III-1-4] Setting the Sound

Level Meter Mode

[Fig. III-1-5] Sound Level

Meter

[Fig. III-1-6] Sound Options

1. 3 FFT Analyzer

Icon for FFT Analyzer. If pressing the icon, graph control icon

, option setting icon

and

sound hearing mode icon

are activated. Likewise, you can also hear the sounds of accelerometer

and microphone with

and

icons.

[Fig. III-1-7] FFT Analyzer

[Fig. III-1-8]Spectrogram

[Fig. III-1-9] Octave Analyzer

1. 4 Spectrogram

Icon for spectrogram. The activated icons are identical with FFT Analyzer.

1. 5 Octave Analyzer

Icon for FFT Based Octave Analysis. The activated icons are identical with FFT Analyzer.

1. 6 FFT Based RPM Meter

Icon to measure RPM. Graph control icon

and measurement option control icon

are

activated only. And Arm button

is only activated because it doesn’t support data store function.

Summary of Contents for SLA-PA201

























































































Search results

Summary of Contents for SLA-PA201

Reviews:

Related manuals for SLA-PA201

Brands by name

Popular brands

SV SLA-PA201, Manual

Search results

Summary of Contents for SLA-PA201

Reviews:

Related manuals for SLA-PA201

Brands by name

Popular brands