9
Connect the lead wire coupler to the clutch lever posi-
tion switch.
A: Clutch lever position switch
B: Lead wire coupler
CLUTCH CABLE
Pass the clutch cable through the lever cover.
A: Clutch cable
B: Lever cover
Turn the clutch cable adjuster and lock nut in as far as
possible and align the slots.
Insert the inner cable end into the recess in the clutch
lever, then pull on the outer cable housing and insert it
into the adjuster.
Do not adjust at this time.
Adjustment will be covered in the SERVICING section.
Install the lever cover.
A: Clutch cable
B: Adjuster
C: Lock nut
D: Cable end
E: Lever cover
NOTE:
Before installing the cable, grease the cable
end.
