17
After confirming that the electrolyte has entered the
battery completely, remove the electrolyte containers
from the battery.
Wait for around 20 minutes.
Insert the caps into the filler holes, pressing in firmly so
that the top of the each caps does not protrude above
the upper surface of the battery’s top cover.
A: Caps
Charge the battery with a battery charger.
After charging the battery, install the battery in the
motorcycle as follows.
Never use anything except the specified battery
electrolyte.
Once the sealing cap has been installed in the
battery, do not remove the sealing cap.
For charging the battery, make sure to use the
charger specially designed for MF battery.
Otherwise, the battery may be overcharged
resulting in shortened service life.
Do not remove the cap during charging.
Position the battery with the cap facing upward
during charging.
Turn off the ignition switch when connecting or
disconnecting the battery lead wires.
When attaching the battery lead wires to the
battery terminals, observe the correct polarity.
NOTE:
The terminal bolts and nuts are attached to the
battery.
