20
FRONT BRAKE LEVER
Make sure the front brake lever position is correct.
The standard setting for this motorcycle is as indicated
in the table below.
A: Adjuster
THROTTLE CABLE
This motorcycle has a twin throttle cable system.
Cable
A
is for pulling cable and cable
B
is for return-
ing.
Check the throttle cable play at the throttle grip.
Throttle cable play: 2.0–4.0 mm
If adjustment is necessary, carry out the following pro-
cedure.
1. Shift the rubber boot
E
.
2. Loosen the throttle cable adjuster lock nut
C
.
3. Turn the adjuster
D
to obtain the correct play.
4. Tighten the lock nut
C
while holding the adjuster
D
.
5. Place the rubber boot
E
.
Standard setting
Position 3
After the adjustment is completed, check that
handlebar movement does not raise the engine
idle speed and that the throttle grip returns
smoothly and automatically.
