20
(2) Within 60 seconds after performing Step (1),
turn the main switch to the “ON & OFF”
(“
”) position and then release it. The main
switch automatically returns to the “PUSH
START/STOP” position.
The buzzer starts emitting short sounds.
Briefly turn the switch after the number of
sounds that is the same as the first pass-
code digit. For example, if the first passcode
digit is seven, turn the switch after the sev-
enth sound.
To set or select zero (0), turn the switch after
the 10th sound.
NOTE:
If the operation in Step (2) is not performed
within 60 seconds after performing Step (1), the
passcode input operation will be cancelled and
the buzzer will sound three (3) times.
ON & OFF
ON & OFF
ON & OFF
PUSH
START
STOP
PUSH
START
STOP
Hold it for five (5) seconds.
* If equipped with top mount type
remote control box: (Main switch panel)
“ON & OFF” “ ”
1
2
3
4
5
6
7
8
9
10
11
Example: When entering 7
ON & OFF
ON & OFF
PUSH
START
STOP
PUSH
START
STOP
After the buzzer emits 10 sounds, it emits one
long sound before to returning to stand-by
mode for the second passcode digit.
(3) Repeat Step 2 to enter the second, third and
fourth passcode digits.
(4) After entering the fourth pass code digit, the
buzzer emits one continuous sound – within
60 seconds, turn the switch ON and hold it
for five (5) seconds until the buzzer stops,
then release it.
NOTE:
The buzzer emits one (1) short sound for the
1st digit, two (2) short sounds for the 2nd digit,
three (3) short sounds for the 3rd digit, and four
(4) short sounds for the 4th digit.
NOTE:
• If a passcode is not entered during the 10
sounds, the process will start over again after
briefly turning the switch.
• If the main switch is not turned to select a
passcode number after repeating the pass-
code input operation three (3) times, the input
operation is cancelled.
In this case, the buzzer emits short beeps for
five (5) seconds to notify that the input opera-
tion has been cancelled.
• If the passcode input operation has been per-
formed multiple times, the last passcode
entered will become effective.
• To interrupt passcode input, install the lock
plate on the emergency stop switch.
Buzzer sound
When entering
the 1st digit
When entering
the 2nd digit
When entering
the 3rd digit
When entering
the 4th digit
