manualshive.com logo in svg

Suzuki 2010 SX4 Sedan, Owner'S Manual

The Suzuki 2010 SX4 Sedan Owner's Manual is now available for free download on our website. This comprehensive manual provides essential information and instructions to ensure a seamless ownership experience. Discover all the features and functionalities of this exceptional sedan by downloading the manual from manualshive.com.

Share
Download
background image

2-65

BEFORE DRIVING

80J23-03E

AIR BAG Light

63J030

This light monitors inflators, crash sensors,
seat belt pretensioners, the front passen-
ger sensing system, and corresponding
electrical circuits.
This light blinks or comes on for several
seconds when the ignition switch is turned
to the “ON” position so you can check if the
light is working. The light will come on and
stay on if there is a problem in the air bag
system or the seat belt pretensioner sys-
tem.

Malfunction Indicator Light

65D530

Your vehicle has a computer-controlled
emission control system. A malfunction
indicator light is provided on the instrument
panel to indicate when it is necessary to
have the emission control system serviced.
The malfunction indicator light comes on
when the ignition switch is turned to the
“ON” position to let you know the light is
working and goes out when the engine is
started.

If the malfunction indicator light comes on
or blinks when the engine is running, ser-
vice to the emission control system is nec-
essary. Bring the vehicle to your SUZUKI
dealer to have the emission control system
serviced right away and avoid hard accel-
eration until the service is performed.
Also, if the light comes on, there may be
something wrong with the continuously
variable transaxle system. Have the sys-
tem inspected by an authorized SUZUKI
dealer.

NOTE:
If the fuel filler cap is not installed fully, the
electrical system gets wet (such as by driv-
ing through a deep puddle of water) or the
fuel tank gets nearly empty, the malfunc-
tion indicator light may come on. If so, the
light will go off after driving a few times
after the fuel filler cap is installed fully, the
electrical system dries out or the fuel tank
is filled.

WARNING

If the AIR BAG light does not blink or
come on when the ignition switch is
turned to the “ON” position or stays
on or comes on when driving, the air
bag system or the seat belt preten-
sioner system may not work properly.
Have both systems inspected by an
authorized SUZUKI dealer.

CAUTION

Continuing to drive the vehicle when
the malfunction indicator light is on
or blinking can cause permanent
damage to the vehicle’s emission
control system, and can affect fuel
economy and driveability.

Summary of Contents for 2010 SX4 Sedan










































































































































































































































































































Reviews:

No comments

Related manuals for 2010 SX4 Sedan

LaserTrack Flare Installation Manual preview
Flare
Brand: LaserTrack Pages: 12
Zavoli Bora Technical Instructions And Installation Manual preview
Bora
Brand: Zavoli Pages: 26
Aries P35-2004 Installation Manual preview
P35-2004
Brand: Aries Pages: 3
Victory 4x4 5TH GEN 4RUNNER Install Instructions preview
5TH GEN 4RUNNER
Brand: Victory 4x4 Pages: 5
Keith WALKING FLOOR Helpful Hints preview
WALKING FLOOR
Brand: Keith Pages: 2
PullRite 20K OE Series Installation Instructions Manual preview
20K OE Series
Brand: PullRite Pages: 10
JKS OGS125 Installation Instructions preview
OGS125
Brand: JKS Pages: 3
TATA Motors Tata Indigo Diesel Owner'S Manual & Service Book preview
Tata Indigo Diesel
Brand: TATA Motors Pages: 190
Safe Fleet Prime Design HBR-E-FT33B Assembly Instructions Manual preview
Prime Design HBR-E-FT33B
Brand: Safe Fleet Pages: 12
Power Acoustik METER 4 Installation preview
METER 4
Brand: Power Acoustik Pages: 4
DEFA MultiCharger 1204 User'S Installation Manual preview
MultiCharger 1204
Brand: DEFA Pages: 28
Steelmate PTS800V7 User Manual preview
PTS800V7
Brand: Steelmate Pages: 14
GYS 029422 Manual preview
029422
Brand: GYS Pages: 32
Edelbrock Turbocharger 15012 Installation Instructions preview
Turbocharger 15012
Brand: Edelbrock Pages: 1
GMC Yukon XL Denali 2015 Owner'S Manual preview
Yukon XL Denali 2015
Brand: GMC Pages: 439
Hama MagLock Vent Operating Instructions Manual preview
MagLock Vent
Brand: Hama Pages: 39
Audiovox Auto Security AA-9103N Installation Manual preview
Auto Security AA-9103N
Brand: Audiovox Pages: 1
Pet Gear PG9050TN Instruction Manual preview
PG9050TN
Brand: Pet Gear Pages: 4

Brands by name

Popular brands

Load more brands