manualshive.com logo in svg

Suzuki 2010 SX4 Sedan, Owner'S Manual

The Suzuki 2010 SX4 Sedan Owner's Manual is now available for free download on our website. This comprehensive manual provides essential information and instructions to ensure a seamless ownership experience. Discover all the features and functionalities of this exceptional sedan by downloading the manual from manualshive.com.

Share
Download
background image

2-9

BEFORE DRIVING

80J23-03E

NOTE:
The keyless start system may not function
correctly in certain environments or under
certain operating conditions such as the
following:
• When there are strong signals coming

from a television, power station or a cel-
lular phone.

• When the remote controller is in contact

with or covered by a metal object.

• When a radio wave type remote keyless

entry is used nearby.

• When the remote controller is placed

near an electronic device such as per-
sonal computer.

Some additional precautions you should
take and information you should be aware
of are: 
• Make sure the ignition key is stowed in

the remote controller. If the remote con-
troller becomes unreliable, you will not
be able to lock or unlock the doors or
start the engine.

• Be sure that the driver always carries the

remote controller.

• If you lose one of the remote controllers,

ask your SUZUKI dealer as soon as pos-
sible for a replacement. Be sure to have
your dealer program the new remote
controller code in your vehicle’s memory
so that the old code is erased, or per-
form the programming procedure your-
self according to the instructions in this
section.

• You can use up to four remote controllers

and ignition keys for your vehicle. Ask
your SUZUKI dealer for details.

• The battery life of the remote controller

is about two years, but it can vary
depending on usage conditions.

80JC026

To stow the ignition key into the remote
controller, push the key in the remote con-
troller until you hear a click.

80JC027

To remove the key from the remote control-
ler, push the button (A) in the direction of
the arrow and pull the key out from the
remote controller.

CAUTION

The remote controller is a sensitive
electronic instrument. To avoid dam-
aging the remote controller:
• Do not expose it to impacts, mois-

ture or high temperature such as by
leaving it on the dashboard under
direct sunlight.

• Keep the remote controller away

from magnetic objects such as a
television.

(A)

Windows: 3, 8

Summary of Contents for 2010 SX4 Sedan










































































































































































































































































































Reviews:

No comments

Related manuals for 2010 SX4 Sedan

Harmar Mobility AL001 Installation And Owner'S Manual preview
AL001
Brand: Harmar Mobility Pages: 10
Uebler F42 Mounting And Operating Instructions preview
F42
Brand: Uebler Pages: 18
Ford F-150 2018 Quick Reference Manual preview
F-150 2018
Brand: Ford Pages: 12
Whispbar K783W Fitting Instructions Manual preview
K783W
Brand: Whispbar Pages: 16
Neuspeed 25.02.22.2 Installation Instructions preview
25.02.22.2
Brand: Neuspeed Pages: 2
Improved Racing E5G-601 Instructions Manual preview
E5G-601
Brand: Improved Racing Pages: 17
INDIWORK A-LINK2-NTG5 Instruction Manual preview
A-LINK2-NTG5
Brand: INDIWORK Pages: 18
Opel CORSA 2020 Infotainment Manual preview
CORSA 2020
Brand: Opel Pages: 103
newmotion Dynamic Power Management Home - Module Installation Instruction preview
Dynamic Power Management Home - Module
Brand: newmotion Pages: 20
Xpresskit PKTX Installation Manual preview
PKTX
Brand: Xpresskit Pages: 12
Edelbrock Performer-Plus 2172 Installation Instructions preview
Performer-Plus 2172
Brand: Edelbrock Pages: 4
Griffin Technology iTrip Bluetooth User Manual preview
iTrip Bluetooth
Brand: Griffin Technology Pages: 6
Mitsubishi Pajero Pinin 1999 Workshop Manual preview
Pajero Pinin 1999
Brand: Mitsubishi Pages: 919
ideus vv900 User Manual preview
vv900
Brand: ideus Pages: 116
Volkswagen Zubehör 000 071 105 D Installation Instructions Manual preview
000 071 105 D
Brand: Volkswagen Zubehör Pages: 133
JAC HFC7151M1V-U221B Workshop Manual preview
HFC7151M1V-U221B
Brand: JAC Pages: 106
Dacia Duster Driver'S Handbook Manual preview
Duster
Brand: Dacia Pages: 244
injen technology SP7035 Installation Instructions preview
SP7035
Brand: injen technology Pages: 3

Brands by name

Popular brands

Load more brands