Suzuki 2010 SX4 Sedan Owner'S Manual Download Page 85 | Manualshive

Page: 85 / 297

background image

2-68

BEFORE DRIVING

80J23-03E

intelligent All Wheel Drive (i-AWD)
LOCK Indicator Light (if equipped)

79J100

When the ignition switch is turned to the
“ON” position, this light comes on briefly so
you can check that the light is working.

The light comes on when the 2WD/i-AWD
switch is changed to the “i-AWD LOCK”
mode from the “i-AWD AUTO” mode.

If the light and the “i-AWD AUTO” indicator
light stay on or come on simultaneously
when driving, there may be something
wrong with the i-AWD system. Have the
system inspected by an authorized
SUZUKI dealer.

NOTE:
• When the vehicle speed is increased,

the “i-AWD LOCK” mode will be changed
to the “i-AWD AUTO” mode automati-
cally. The “i-AWD AUTO” indicator light
will come on and stay on.

• When the ignition switch is turned to the

“OFF” position, the “i-AWD LOCK” mode
is canceled.

For details of the “i-AWD LOCK” mode,
refer to “Using the 2WD/i-AWD Switch” in
the “OPERATING YOUR VEHICLE” sec-
tion.

Daytime Running Light (D.R.L.) Indi-
cator Light (if equipped)

60B245

With the D.R.L. system, the headlights
light, but are dimmer than the low beam,
when the following three conditions are all
met. Whenever the D.R.L. system is oper-
ating, the D.R.L. indicator light remains on.

Conditions for D.R.L. system operation
1) The engine is running.
2) The parking brake is released.
3) The headlights are off.

Speedometer

80J2063

The speedometer indicates vehicle speed
in km/h and mph.

CAUTION

Do not operate your vehicle in “i-
AWD LOCK” mode on dry hard sur-
faces.

EXAMPLE

«
...
83
84
85
86
87
...
»

Summary of Contents for 2010 SX4 Sedan










































































































































































































































































































Reviews:

No comments

Related manuals for 2010 SX4 Sedan

Brand: Whispbar Pages: 15

Brand: Buick Pages: 428

Brand: Toro Pages: 24

Brand: Audiovox Pages: 24

Brand: Mercedes-Benz Pages: 2

Brand: Westin Pages: 2

Brand: A-Tach Pages: 2

Brand: Kia Pages: 51

Electra 225 1965

Brand: Buick Pages: 914

OCTAVIA - TECHNICAL CHANGES 11-2009

Brand: Skoda Pages: 16

Brand: CrimeStopper Pages: 1

Brand: RAM Pages: 13

Brand: J. Strong Pages: 2

Brand: Calix Pages: 4

OUTLANDER PHEV 2022

Brand: Mitsubishi MOTORS Pages: 8

Brand: Renault Pages: 11

Brand: BMW Pages: 64

Brand: Lexus Pages: 609

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands