manualshive.com logo in svg

Suzuki 2010 SX4 Sedan, Owner'S Manual

The Suzuki 2010 SX4 Sedan Owner's Manual is now available for free download on our website. This comprehensive manual provides essential information and instructions to ensure a seamless ownership experience. Discover all the features and functionalities of this exceptional sedan by downloading the manual from manualshive.com.

Share
Download
background image

5-14

OTHER CONTROLS AND EQUIPMENT

80J23-03E

80JM127

Be careful not to cover the interior temper-
ature sensor (10) located between the
steering wheel and the climate control
panel, or the solar sensor (11) located at
the top of the driver’s side dashboard.
These sensors are used by the automatic
system to regulate temperature.

Manual operation

You can manually control the climate con-
trol system. Set the selectors to the
desired positions.

79J070

NOTE:
If you need maximum defrosting:
• push the defrost switch (5) to turn on the

defroster (the air conditioning system will
come on and the “FRESH AIR” mode will
be selected automatically),

• set the blower speed selector to HIGH,
• adjust the temperature selector to the

“HI” indication on the display, and

• adjust the side outlets so the air blows

on the side windows.

Maintenance

If you do not use the air conditioner for a
long period, such as during winter, it may
not give the best performance when you
start using it again. To help maintain opti-
mum performance and durability of your air
conditioner, it needs to be run periodically.
Operate the air conditioner at least once a
month for one minute with the engineidling.
This circulates the refrigerant and oil and
helps protect the internal components.

Your air conditioner is equipped with air fil-
ters. Clean or replace them as specified in
the “Maintenance Schedule” in the
“INSPECTION AND MAINTENANCE” sec-
tion. Have this job done by your SUZUKI
dealer as the lower glove box must be low-
ered for this job.

NOTE:
Your vehicle uses the air conditioning
refrigerant HFC-134a, commonly called
“R-134a”. R-134a replaced R-12 around
1993 for automotive applications. Other
refrigerants are available, including recy-
cled R-12, but only R-134a should be used
in your vehicle.

(11)

(10)

EXAMPLE

EXAMPLE

CAUTION

Using the wrong refrigerant may
damage your air conditioning sys-
tem. Use R-134a only. Do not mix or
replace the R-134a with other refrig-
erants.

Accessory Socket: 8
Frame Hooks: 5, 6

Summary of Contents for 2010 SX4 Sedan










































































































































































































































































































Reviews:

No comments

Related manuals for 2010 SX4 Sedan

Front Runner Easy-Out Fitting Instructions preview
Easy-Out
Brand: Front Runner Pages: 5
IAG IAG-ENG-5003BK Instructions preview
IAG-ENG-5003BK
Brand: IAG Pages: 3
Metra Electronics 99-3103 Installation Instructions preview
99-3103
Brand: Metra Electronics Pages: 2
Audi A4 2016 Quick Questions And Answers preview
A4 2016
Brand: Audi Pages: 9
Belkin WIC004 Setting Up preview
WIC004
Brand: Belkin Pages: 4
iRacing Porsche 911 GT3 R User Manual preview
Porsche 911 GT3 R
Brand: iRacing Pages: 25
EUFAB 16465 Operating Instructions Manual preview
16465
Brand: EUFAB Pages: 12
iDataLink ADS-TBSL-GM Install Manual preview
ADS-TBSL-GM
Brand: iDataLink Pages: 6
Audi 2001 A3 Quick Reference Manual preview
2001 A3
Brand: Audi Pages: 4
Thule Brink 5324 Fitting Instructions Manual preview
Brink 5324
Brand: Thule Pages: 15
Buick 1995 Roadmaster Manual preview
1995 Roadmaster
Brand: Buick Pages: 340
Honda 2007 Pilot Installation Instructions Manual preview
2007 Pilot
Brand: Honda Pages: 7
Kargo Master 4090L Instruction Manual preview
4090L
Brand: Kargo Master Pages: 10
ULTIMATE SPEED 274817 Instructions For Use And Safety Manuallines preview
274817
Brand: ULTIMATE SPEED Pages: 18
Westfalia 300025300113 Installation Instructions Manual preview
300025300113
Brand: Westfalia Pages: 97
Jeep Wrangler Postal Vehicle 2017 Owner'S Manual Supplement preview
Wrangler Postal Vehicle 2017
Brand: Jeep Pages: 62
Toyota 2001 MR2 Spyder Owner'S Manual preview
2001 MR2 Spyder
Brand: Toyota Pages: 234
Chrysler 2005 300 Manual preview
2005 300
Brand: Chrysler Pages: 374

Brands by name

Popular brands

Load more brands