manualshive.com logo in svg

Suzuki 2010 SX4 Sedan, Owner'S Manual

The Suzuki 2010 SX4 Sedan Owner's Manual is now available for free download on our website. This comprehensive manual provides essential information and instructions to ensure a seamless ownership experience. Discover all the features and functionalities of this exceptional sedan by downloading the manual from manualshive.com.

Share
Download
background image

3-23

OPERATING YOUR VEHICLE

80J23-03E

How the ABS Works

A computer continuously monitors wheel
speed. The computer compares the
changes in wheel speed when braking. If
the wheels slow suddenly, indicating a
skidding situation, the computer will
change braking pressure several times
each second to prevent the wheels from
locking. When you start your vehicle or
when you accelerate after a hard stop, you
may hear a momentary motor or clicking
noise as the system resets or checks itself.

Electronic Stability Program 
(ESP

®

) (if equipped)

ESP

®

 is a registered trademark of Daimler

AG.

The Electronic Stability Program (ESP

®

)

helps to control the vehicle during corner-
ing if front wheels or rear wheels skid. It
also assists you in maintaining traction
while accelerating on loose or slippery
road surfaces. It does this by regulating the
engine’s output, and by selectively apply-
ing the brakes. In addition, ESP

®

 helps to

avoid skidding by controlling braking pres-
sure.

WARNING

If the ABS warning light ((1) or (2))
and the Brake system warning light
(3) on the instrument panel simulta-
neously stay on or come on when
driving, both anti-lock function and
rear brake force control function (pro-
portioning valve function) of the ABS
system may have failed. This could
cause the rear wheels to skid or the
vehicle to spin during braking on a
slippery road or hard braking on a
dry paved road. If both warning lights
come on, drive carefully, avoiding
hard braking as much as possible,
and ask your SUZUKI dealer to
inspect the ABS system immediately.

WARNING

The ABS may not work properly if
tires or wheels other than those
specified in the owner’s manual are
used. This is because the ABS works
by comparing changes in wheel
speed. When replacing tires or
wheels, use only the size and type
specified in this owner’s manual.

WARNING

The ESP

®

 cannot enhance the vehi-

cle’s driving stability in all situations
and does not control your vehicle’s
entire braking system. The ESP

®

 can-

not prevent accidents, including
those resulting from excessive speed
in turns, or hydroplaning. Only a safe
and attentive driver can prevent acci-
dents. The capabilities of an ESP

®

-

equipped vehicle must never be used
as a substitute for careful driving.

Summary of Contents for 2010 SX4 Sedan










































































































































































































































































































Reviews:

No comments

Related manuals for 2010 SX4 Sedan

Samsung HF1000 User Manual preview
HF1000
Brand: Samsung Pages: 133
Ford F-150 2018 Quick Reference Manual preview
F-150 2018
Brand: Ford Pages: 12
Chevrolet Camaro 12000 1968 Series Factory Assembly Instruction Manual preview
Camaro 12000 1968 Series
Brand: Chevrolet Pages: 455
FORM FIT HDW 1779 Installation Instructions preview
HDW 1779
Brand: FORM FIT Pages: 2
Monacor Carpower CAP-20 Quick Manual preview
Carpower CAP-20
Brand: Monacor Pages: 2
Saab 2008 9-5 Owner'S Manual preview
2008 9-5
Brand: Saab Pages: 288
Sunsky S-GPS-0142 User Manual preview
S-GPS-0142
Brand: Sunsky Pages: 9
WABCO Truck Training Model Operating Instructions Manual preview
Truck Training Model
Brand: WABCO Pages: 56
STARLANE POLE STAR PRO Installation And Instruction Manual preview
POLE STAR PRO
Brand: STARLANE Pages: 24
LXE Akerstroms Tx700 Configuration Manual preview
Akerstroms Tx700
Brand: LXE Pages: 146
Mazda 2008 B2300 Truck Owner'S Manual preview
2008 B2300 Truck
Brand: Mazda Pages: 280
Needit Park Mini User Manual preview
Park Mini
Brand: Needit Pages: 2
Gemini KIT ParkingSensor 814 Installation And Use Manual preview
KIT ParkingSensor 814
Brand: Gemini Pages: 6
AutoLoc SB3PR Series User Manual And Installation Manual preview
SB3PR Series
Brand: AutoLoc Pages: 6
Reimo TOUR EASY 4 936550 Quick Start Manual preview
TOUR EASY 4 936550
Brand: Reimo Pages: 4
Metra Electronics 99-9302 Installation Instructions Manual preview
99-9302
Brand: Metra Electronics Pages: 8
AD Boivin ZX2 2008 Adjustment Manual preview
ZX2 2008
Brand: AD Boivin Pages: 37
Ecco ED5101 Installation And Operating Instructions Manual preview
ED5101
Brand: Ecco Pages: 11

Brands by name

Popular brands

Load more brands