03/01/16
670- 00017B
2
2.0 Introduction
For more than 30 years, Movotec® lift systems have been used to make work-surfaces
height adjustable. They have been used on industrial workbenches, small machine bases,
massage tables, physical therapy tables, packaging equipment, and many other
applications.
Years of experience, engineering, and research have resulted in a product that is proven,
time-tested and will deliver unparalleled performance.
Thank you for purchasing the Movotec® Crank Driven “Bolt-On” Lift System.
3.0 Safety Instructions
READ THE INSTRUCTIONS IN THIS MANUAL BEFORE ATTEMPTING TO
INSTALL, OPERATE, OR SERVICE THIS PRODUCT. FOLLOW THESE
SAFETY INSTRUCTIONS AT ALL TIMES.
This manual contains safety, installation, operation, maintenance and user service
instructions for the Movotec
®
Crank Driven “Bolt-On” Lift System. Suspa
®
Incorporated
is not responsible for any alteration, misuse, misapplication, or abuse of this product
resulting in property damage, personal injury or death.
FAILURE TO FOLLOW THE INSTRUCTIONS IN THIS
MANUAL COULD RESULT IN PROPERTY DAMAGE,
PERSONAL INJURY OR DEATH.
If you have any questions about the use of this product, the safety practices outlined in
this manual or would like a printed copy of this manual, please contact us (see Section 15
for contact information).
VERIFY SYSTEM SELECTION. Before the installing or operating the system,
please review the application to confirm that the correct Movotec
®
Lift System has been
selected. Pay particular attention to the load capacity and adjustment range ratings listed
on the blue product label.
HANDLE COMPONENTS WITH CARE. Do not handle system by the hydraulic
tubing. Keep hydraulic tubing far from heat, sharp edges, and moisture. If hydraulic
tubing is damaged, discontinue use and have the tubing replaced immediately. Do not
ever attempt to repair a damaged hydraulic tubing line.
VISUALLY INSPECT COMPONENTS. Before installing and operating the system,
inspect all components for any damage that may have occurred during shipping and