03/01/16
670- 00017B
12
•
Please note that the drilling templates are shown upside down due to the
orientation of the workstation.
Lift cylinder mounting hole locations vary depending
upon the lift cylinder model number. The lift cylinder
model number can be found on the product label.
“Bolt-On” lift cylinder model numbers begin with “CB”
(i.e. CB431).
Lift cylinder mounting instructions can also be found
printed on the drilling templates provided with the system.
•
Drill (4) - 6mm holes in the appropriate locations indicated on each drill
templates.
•
Select cylinder mounting screws with a property class of 8.8 or greater.
NOTICE
