Surveon CAM3351R4, User Manual

Page: 112 / 174

112
Note:
For the above functions, only one function among (1) Object
Counting/(2)Object Direction Detection/(3) Go In/Out Detection
could be chosen! For (4)/(5) could be used that combining with other
functions.
Object Counting
Note:
If the polygon has been chosen, the frame would be shown as
red. On the contrary, the frame would be green.

Enable Object Counting - Tick this option to enable the function.

Window Name – Pre-set as the direction name of Direction type, or
input by yourself. (English/ numbers only)

Vertex Number – Pre-set as 4. After inputting the numbers, the
polygon could be created. (choose “Modify” if you need to make any
revision.)

Object Type – Currently, this function is only suitable for “People.”

Direction Type – Choose the object counting direction. Single
direction in/ single direction out. Once the direction is modified, the
name will be reset to the pre-set value.

Reset counting result every – Choose the time that you are going to
reset the counting result. Changing or Disabling this option will reset
all the counting area result.