Safety instructions
3
Safety instructions
Observe the following instructions to use the product safely and prevent any risk of injury or property damage.
Warning
Noncompliance of instructions could lead to serious injury or death.
Installation
Do not install the product in a place with direct sunlight, moisture, dust, or soot.
•
A fire or electric shock may occur.
Do not install the product in a place with heat from an electric heater.
•
A fire or electric shock may occur due to overheating.
Install the product in a dry place.
•
Otherwise, a product damage or electric shock may occur due to moisture.
Install the product in a place with no electromagnetic interference.
•
Otherwise, a product damage or electric shock may occur.
The user should not install or repair the product independently.
•
A fire, electric shock, or personal injury may occur.
•
If the product has been damaged due to independent installation or repair of the product by the user, free A/S service will not be
provided.
Operation
Do not allow liquids such as water, beverages, or chemicals get into the product.
•
A fire, electric shock, or product damage may occur.
Caution
Noncompliance of instructions could lead to minor injury or product damage.
Installation
Do not install the power supply cable in a place where people pass by.
•
Product damage or physical injury may occur.
Do not install the product near a highly magnetic object such as a magnet, TV, (especially CRT) monitor, or speaker.
•
A product failure may occur.
Use only a power supply adaptor of D.C 12 V and 500 mA or higher.
•
If the proper power is not used, the product may not operate normally.
If installing the product outside where the product is completely exposed, it is recommended to install the product together with
the enclosure.
Use a separate power supply for Secure I/O 2, electric lock and BioStation A2 respectively.
•
If connecting and using the power supply to these devices together, the devices may malfunction.
Keep at least 10cm distances between the devices when install multiple devices.
•
Otherwise, RF performance is affect to the other device, the devices may not operate normally.
