SUPMEA SUP-5000C, User Manual

Page: 36 / 41

34
3 3
Adjustment at the
cold end
Short Read-write
The data of the communication
is the value after the adjustment
value is magnified 10 times.
For example: The adjustment
value at cold end is -1.0, then
the communication data is -10.
4 4 Equipment address Char Read-write
5 5
Treatment of
Interruption
Char Read-write
0: high limit of range 1: low
limit of range 2: maintain
preceding values.
6 6 Baud rate Char Read-write
0...6respectively represents:
baud rates of 1200 …57600.
7 7
No.1,2 bytes of IP
address
Short Read-write
Example: The IP address is
192.168.100.2, and 2 bytes of
the register address from low to
high
is 192 and 168
respectively.
8 8
No.3,4 bytes of IP
address
Short Read-write
Same as last example, 2 bytes
of the register address from low
to high is 100 and 2
respectively.
9 9
Port number of
Ethernet
Short Read-write
10 10 Printing interval Short Read-write
11 11
The Hour for the
starting time of
printing
Char Read-write
12 12
The Minute for the
starting time of
printing
Char Read-write
13 13 Alarming printing Char Read-write 0: Off 1: On
14 14
Number of input
channel
Char Write only
Value range: 0...11 respectively
corresponds to channel 1... 12
(Note 1)
15 15
No.1, 2 character of
bit number
Short Read-write
See "Parameters of Channels"
in the manual: Both bit
numbers
and Chinese
characters in units are
16 16
No.3, 4 character of
bit number
Short Read-write