Supero X8QB6-F User Manual Download Page 93

Page: 93 / 105

Chapter 5: AMI BIOS

5-27

MMIOH (Memory Mapped IOH) Size Per IOH (IO_Hub)

This item sets Memory Mapped IOH size for each IOH. The options are

, 4G

and 6G.

Logical Interrupt Mode

This item allows the user to select the setting for Logical Interrupt Mode. The op-

tions are

Flat Mode

, and Cluster Mode.

Cluster Mode Check Sampling

If this item is set to Enabled, APICID in the IntPriUpd message will check non-zero

items. The options are

Err/Warn/Info0/1 (Error/Warning/Information 0/1),

Err/

Warn/Info0 (Error/Warning/Information 0) and Err/Warn (Error/Warning).

QPI (Quick Path Interconnect) Debug Message Output Level

This item allows the user to decide the level that a QPI debug message will dis-

play.

CRC (Cyclic Redundancy Check) Mode

CRC or Polynomial Code Checksum is designed to detect accidental changes

made to raw computer data in networks, storage devices and HDDs. This feature

allows the user to select the CRC Mode. The options are

8bit CRC

and 16bit Roll-

ing CRC.

QPI (Quick Path Interconnect) Links Speed

QuickPath Interconnect (QPI) is the connection between the CPU and the mother-

board's I/O hub. Use this feature to modify data transfer speed for QPI Link con-

nections. The options are Slow-Mode, and

Full Speed

QPI Frequency Select (Available if the item - QPI Link Speed is set to Full
Speed)

This feature allows the user to select the desired QPI frequency. The options are

Auto

, 4.800 GT, 5.866GT, 6.400 GT.

QPI Scrambling

Select Enabled to enable QPI Scrambling support. The options are

Enabled

and

Disabled.

Summary of Contents for X8QB6-F










































































































Search results

Summary of Contents for X8QB6-F

Reviews:

Related manuals for X8QB6-F

Brands by name

Popular brands

Supero X8QB6-F, User Manual

Search results

Summary of Contents for X8QB6-F

Reviews:

Related manuals for X8QB6-F

Brands by name

Popular brands