Supero X8QB6-F User Manual Download Page 26

Page: 26 / 105

2-14

X8QB6-F/X8QBE-F Motherboard User’s Manual

four 8-pin (JPW1~2, JPW4~5) power connectors on the motherboard.

Failure to do so will void the manufacturer warranty on your power supply

and motherboard.

It is strongly recommended that you use a high quality power supply that meets ATX

power supply Specifi cation 2.02 or above. It must also be SSI compliant. (For more

information, please refer to the web site at http://www.ssiforum.org/). Additionally, in

areas where noisy power transmission is present, you may choose to install a line

fi lter to shield the computer from noise. It is recommended that you also install a

power surge protector to help avoid problems caused by power surges.

2-7 Super I/O

The Super I/O supports two high-speed, 16550 compatible serial communication

ports (UARTs). Each UART includes a 16-byte send/receive FIFO, a programmable

baud rate generator, complete modem control capability and a processor interrupt

system. Both UARTs provide legacy speed with baud rate of up to 115.2 Kbps

as well as an advanced speed with baud rates of 250 K, 500 K, or 1 Mb/s, which

support higher speed modems.

The Super I/O provides functions that comply with ACPI (Advanced Confi guration

and Power Interface), which includes support of legacy and ACPI power manage-

ment through an SMI or SCI function pin. It also features auto power management

to reduce power consumption.

2-8 Overview of the Nuvoton WPCM450R Controller

The Nuvoton WPCM450R Controller is a Baseboard Management Controller

(BMC) that supports the 2D/VGA-compatible Graphics Core with the PCI interface,

Virtual Media, and Keyboard/Video/Mouse Redirection (KVMR) modules. With

blade-oriented Super I/O capability built-in, the WPCM450R Controller is ideal for

legacy-reduced server platforms.

The WPCM450R interfaces with the host system via a PCI interface to commu-

nicate with the Graphics core. It supports USB 2.0 and 1.1 for remote keyboard/

mouse/virtual media emulation. It also provides LPC interface to control Super IO

functions. The WPCM450R is connected to the network via an external Ethernet

PHY module.

The WPCM450R communicates with onboard components via six SMBus inter-

faces, fan control, and Platform Environment Control Interface (PECI) buses.

Note:

For more information on IPMI confi guration,

please refer to the

Embedded IPMI User's Guide posted on our Website @ http://www.su-

permicro.com/support/manuals/.

Summary of Contents for X8QB6-F










































































































Search results

Summary of Contents for X8QB6-F

Reviews:

Related manuals for X8QB6-F

Brands by name

Popular brands

Supero X8QB6-F, User Manual

Search results

Summary of Contents for X8QB6-F

Reviews:

Related manuals for X8QB6-F

Brands by name

Popular brands