Supero X8QB6-F User Manual Download Page 70

Page: 70 / 105

5-4

X8QB6-F/X8QBE-F

Motherboard

User’s Manual

5-3 Advanced Setup Confi gurations

Use the arrow keys to select Boot Setup and press <Enter> to access the submenu

items.

Warning:

Be sure to select the correct setting for each item in this section.

A wrong setting selected may cause the system to malfunction.



CPU Confi guration

This submenu allows the user to confi gure advanced CPU settings. The following

items are included in this section.

Confi gure advanced CPU settings

This feature allows the user to confi gure CPU Bridge settings. The items in the

submenu are listed below.

Module Revision

•

: This item displays the module revision number.

Manufacturer

•

: This item displays the manufacturer of the CPU used in the

motherboard.

Type

•

: This item displays the type of the CPU used in the motherboard including

its frequency.

Frequency

•

: This item displays the CPU frequency.

BCLK Speed

•

: This item displays the CPU BCLK speed.

Summary of Contents for X8QB6-F










































































































Search results

Summary of Contents for X8QB6-F

Reviews:

Related manuals for X8QB6-F

Brands by name

Popular brands

Supero X8QB6-F, User Manual

Search results

Summary of Contents for X8QB6-F

Reviews:

Related manuals for X8QB6-F

Brands by name

Popular brands