Supero X8QB6-F User Manual Download Page 13

Page: 13 / 105

Chapter 2: Overview

2-1

Chapter 2

Overview

2-1 Overview

Checklist

Congratulations on purchasing your computer motherboard from an acknowledged

leader in the industry. Supermicro boards are designed with the utmost attention to

detail to provide you with the highest standards in quality and performance.

Please check that the following items have all been included with your motherboard.

If anything listed here is damaged or missing, contact your retailer.

The following items are included in the retail box.

One (1) Supermicro Mainboard

•

Six (6) Serial ATA cables (CBL-0044Lx6) (for X8QBE-F)

•

Two (2) I-Pass to 4 Serial ATA (50-cm) cables (CBL-097L-02) (for X8QB6-F)

•

One (1) Supermicro CD containing drivers and utilities

•

One (1) User's/BIOS Manual (MNL#1178)

•

Summary of Contents for X8QB6-F










































































































Search results

Summary of Contents for X8QB6-F

Reviews:

Related manuals for X8QB6-F

Brands by name

Popular brands

Supero X8QB6-F, User Manual

Search results

Summary of Contents for X8QB6-F

Reviews:

Related manuals for X8QB6-F

Brands by name

Popular brands