Chapter 5: AMI BIOS
5-21
Flow Control
This feature allows the user to set the fl ow control for Console Redirection. The
options are
None
, Hardware, and Software.
Redirection After BIOS POST
Select Disabled to turn off Console Redirection after Power-On Self-Test (POST).
Select Always to keep Console Redirection active all the time after POST. (Note:
This setting may not be supported by some operating systems.) Select Boot Loader
to keep Console Redirection active during POST and Boot Loader. The options
are Disabled, Boot Loader, and
Always
.
Terminal Type
This feature allows the user to select the target terminal type for Console Redirec-
tion. The options are
ANSI
, VT100, and VT-UTF8.
VT-UTF8 Combo Key Support
A terminal keyboard defi nition that provides a way to send commands from a remote
console. The options are
Enabled
and Disabled.
Sredir Memory Display Delay
This feature defi nes the length of time in seconds to display memory information.
The options are
No Delay,
Delay 1 Sec, Delay 2 Sec, and Delay 4 Sec.
5-4 PCI/PnP Confi guration
Warning:
Be sure to select the correct setting for each item in this section.
A wrong setting selected may cause the system to malfunction.