Supero X8QB6-F User Manual Download

Page: 94 / 105

5-28

X8QB6-F/X8QBE-F

Motherboard

User’s Manual

5-7 Chipset Settings

Warning:

Be sure to select the correct setting for each item in this section.

A wrong setting selected may cause the system to malfunction.



CPU Bridge Confi guration

This feature allows the user to confi gure CPU Bridge settings. The items included

in the submenu are listed below.

CPU Revision:

•

This item displays the CPU revision number.

Current QPI Frequency:

•

This item displays the current QPI frequency.

MRC/QPI RC Version:

•

This item displays the MRC/QPI RC version number.

NUMA Support

Select Enabled to enable Non-Uniform Memory Access (NUMA) support to enhance

CPU performance. The options are

Enabled

and

Disabled.



North Bridge Confi guration

This feature allows the user to confi gure the settings for the Intel North Bridge chip.

The items included in the submenu are listed below.

Thermal Sensor

Select Enabled to activate thermal sensor for system temperature monitoring. The

options are Disabled and

Enabled

Summary of Contents for X8QB6-F










































































































Search results

Summary of Contents for X8QB6-F

Reviews:

Related manuals for X8QB6-F

Brands by name

Popular brands

Supero X8QB6-F, User Manual

Search results

Summary of Contents for X8QB6-F

Reviews:

Related manuals for X8QB6-F

Brands by name

Popular brands