Supero X7SBU, User Manual

Page: 72 / 89

4-18
X7SBU User's Manual
Fan Speed Control Modes
This feature allows you to decide how the system controls the speeds of the
onboard fans. The CPU temperature and the fan speed are correlative. When
the CPU on-die temperature increases, the fan speed will also increase, and vice
versa. If the option is set to “4-pin”, the fan speed will be controlled by Pulse Width
Modulation (PWM). Select “Workstation” if your system is used as a Workstation.
Select “Disable” to disable the fan speed control function to allow the onboard
fans to constantly run at full speed (12V). The Options are:
Disabled (Full
Speed) , 3-pin (server), 3-pin (workstation), 4-pin (server) and 4-pin (workstation).
Do not select 4-pin settings if you have a mix of 3-pin and 4-pin fans.
Voltage Monitoring
The following items will be monitored and displayed:
VcoreA, +1.25V, -12V, V_DIMM, +3.3V, +12V, 5Vsb, 5Vdd, P_VTT, Vbat
Note: In the Windows OS environment, the Supero Doctor III settings take pre-
cedence over the BIOS settings. When first installed, Supero Doctor III adopts
the temperature threshold settings previously set in the BIOS. Any subsequent
changes to these thresholds must be made within Supero Doctor, since the
SD III settings override the BIOS settings. For the Windows OS to adopt the
BIOS temperature threshold settings, please change the SDIII settings to be
the same as those set in the BIOS.