Supero X7SBU, User Manual

Page: 59 / 89

Chapter 4: BIOS
4-5
detailed options of these items. Set the correct configurations accordingly. The
items included in the sub-menu are:
Type
This option allows the user to select the type of IDE hard drive. Select Auto to
allow the BIOS to automatically configure the parameters of the HDD installed
on a slot. Enter a number between 1 to 39 to select a predetermined HDD type.
Select User to allow the user to enter the parameters of the HDD installed.
Select CDROM if a CDROM drive is installed. Select ATAPI if a removable
disk drive is installed.
Multi-Sector Transfers
This item allows the user to specify the number of sectors per block to be
used in multi-sector transfer. The options are
Disabled
, 4 Sectors, 8 Sectors,
and 16 Sectors.
LBA Mode Control
This item determines whether the Phoenix BIOS will access the IDE Primary
Master Device via the LBA mode. The options are Enabled and
Disabled.
32 Bit I/O
This option allows the user to enable or disable the function of 32-bit data
transfer. The options are Enabled and
Disabled .
Transfer Mode
This option allows the user to set the transfer mode. The options are
Standard , Fast PIO1, Fast PIO2, Fast PIO3, Fast PIO4, FPIO3/DMA1 and
FPIO4/DMA2.
Ultra DMA Mode
This option allows the user to configure the Ultra DMA Mode setting. The options
are Disabled , Mode 0, Mode 1, Mode 2, Mode 3, Mode 4, and Mode 5.
System Memory
This display informs you how much system memory is available in the system.
Installed Memory
This display informs you how much memory installed in the system is detected
by the BIOS.