Chapter 2: Installation
2-17
A. IPM-LAN (shared between Node 1/
Node 2)
B. P1-LAN1 (LAN 1 for Node 1)
C. P2-LAN1 (LAN 1 for Node 2)
D. P1-LAN2 (LAN 2 for Node 1)
E. P2-LAN2 (LAN 2 for Node 2)
MAC CODE
MAC CODE
BAR CODE
J9
MAC CODE
MAC CODE
X10SLE-DF
Rev. 1.01
B
C
D
A
E
F
A
B
C
E
Ethernet Ports
Two Gigabit Ethernet ports (LAN1/2) fore each node are located on the front I/O
panel to provide internet connections. LAN Ports 1/2 for Node 1 are located at P1-
LAN1 and P1-LAN2; LAN Ports 1/2 for Node 2 are located at P2-LAN1/P2-LAN2.
In addition, an IPMI-LAN port, which provides a network connection via the IPMI
2.0 interface, is located next to the P2/P1-LAN1 ports on the IO panel. The IPMI-
LAN port is shared between Node 1 and Node 2. This feature is supported by the
onboard LAN Switch chip. All LAN ports accept the RJ45 cable.
Note
: Please refer to the LED Indicator Section for LAN LED information.
