Chapter 4: AMI BIOS
4-17
PCIe/PCI/PnP Configuration
This feature allows the user to set the PCI/PnP configurations for the following items:
Above 4G Decoding
Select Enabled for 64-bit devices to be decoded above the 4GB address space
if 64bit PCI decoding is supported by the system. The options are
Disabled
and
Enabled.
VGA Palette Snoop
Select Enabled to support VGA palette register snooping, which will allow a PCI
card that does not contain its own VGA color palette to examine the video card pal
-
ette and mimic it for proper color display. The options are
Disabled
and Enabled.
Launch Storage OPROM Policy
This feature controls how the system executes UEFI (Unified Extensible Firmware
Interface), and legacy storage OPROM. Select Legacy Only to boot the system using
a legacy device installed in a PCI slot. The options are UEFI Only and
Legacy Only
.
Other PCI Device ROM Priority
This feature selects a PCI device OPROM to launch for system boot if this device
is not a network, mass storage, or video device. The options are UEFI Only and
Legacy Only
.
Onboard P1-LAN1 Option ROM
Select iSCSI to use the iSCSI Option ROM to boot the computer using a network
device. Select PXE (Preboot Execution Environment) to use an PXE Option ROM
to boot the computer using a network device. The options are Disabled, iSCSI,
and
PXE
.
Onboard P1-LAN2 Option ROM
Select PXE (Preboot Execution Environment) to use an PXE Option ROM to boot
the computer using a network device. The options are
Disabled
and PXE.
Network Stack
Select Enabled to use PXE (Preboot Execution Environment) devices for network
stack support. Select Disabled to use UEFI (Unified Extensible Firmware Interface)
devices for network stack support. The options are Enabled and
Disabled
.
IPv4 PXE Support (Available when Network Stack is set to Enabled)
Set this item to Enabled to activate IPv4 PXE Support. The options are
Enabled
and Disabled.
