Chapter 2: Installation
2-19
MAC CODE
MAC CODE
BAR CODE
JKVM1
LE5
LED7
LE6
JBT1
JBT2
J10
P1-JPG1
P1-JWD1
JPV1
J3
J4
P2-JPG2
J7
J2
JPV2
P1-JPME1
P1-JPME2
P2-JPME2
P1-JPME2
J38
J37
SW2
J9
P2-DIMMA2
P2-DIMMB1 P2-DIMMB2
P2/P1-LAN1
MAC CODE
MAC CODE
P1-POR
T80
PLED2
PLED1
P2/P1-LAN2
SW
NODE
USB0/1
Battery
P2-POR
T80
IPMI_LAN
PWR
CPU2
CPU1
P2-DIMMA1
P1-DIMMB2
P1-DIMMB1
P1-DIMMA2
P1-DIMMA1
BT
SW1
X10SLE-DF
Rev. 1.01
LAN
CTRL
LAN
CTRL
BMC
BMC
BMC
Firmware
BMC
Firmware
BMC
Memory
BMC
Memory
LAN
Switch
Node
Switch
PCH
PCH
J8
(SMC-Proprietary
Add-On Card Slot)
P2-JWD1
A
2-7 Connecting Cables
This section provides brief descriptions and pin-out definitions for onboard headers
and connectors. Be sure to use the correct cable for each header or connector.
SMC-Proprietary Add-On Card Slot
An SMC-proprietary add-on card slot is located at J8 on the motherboard. Install
an appropriate add-on card into this slot to provide power supply and SIG SATA
interface support to Node 1 or Node 2. Press the power button located at SW1 to
power on or power off Node 1 and Node 2. See the layout below for the locations.
A.
J37 (P1-PORT 80)
B.
J38 (P2-PORT 80)
B
Port 80 Support
A Port 80 header is located on each node to support Port 80 connection for POST
code debugging. Port 80 support for Node 1 is located at J37 (P1-PORT 80), and
for Node 2 is located at J38 (P1-PORT 80). See the layout below for the locations.
