2-10
X10SLE-DF User’s Manual
MAC CODE
MAC CODE
BAR CODE
J9
MAC CODE
MAC CODE
X10SLE-DF
Rev. 1.01
2-4 Installing DDR3 Memory
Note
: Check the Supermicro website for recommended memory mod
-
ules.
CAUTION
Exercise extreme care when installing or removing DIMM
modules to prevent any possible damage.
DIMM Installation
1. Insert the desired number of DIMMs
into the memory slots, starting with
P1-DIMMA1 (for Node 1) and P2-
DIMMA (for Node 2). For the system
to work properly, please use memory
modules of the same type and speed
in the same motherboard.
Release Tabs
Notches
2. Push the release tabs outward on
both ends of the DIMM slot to unlock
it.
Press both notches
straight down into
the memory slot.
3.
Align the key of the DIMM mod
-
ule with the receptive point on the
memory slot.
4. Align the notches on both ends of
the module against the receptive
points on the ends of the slot.
5. Use two thumbs together to press
the notches on both ends of the
module straight down into the slot
until the module snaps into place.
6.
Press the release tabs to the lock
positions to secure the DIMM module
into the slot.
P1-DIMMA1
(for Node 1)
P2-DIMMA1
(for Node 2)
