Chapter 2: Installation
2-11
Channel B, Slot 2
(Blue Slot)
Channel B, Slot 1
Channel A, Slot 1
Channel A, Slot 2
(Blue Slot)
Towards the edge of the motherboard
Towards the CPU
Removing Memory Modules
Reverse the steps above to remove the DIMM modules from the motherboard.
Memory Support
The X10SLE-DF supports two nodes; each node supports up to 32GB of Unbuf
-
fered (UDIMM) DDR3 ECC 1600/1333/1066 MHz VLP (Very-Low-Profile) memory
in 4 slots. Populating these DIMM modules with a pair of memory modules of the
same type and size will result in interleaved memory, which will improve memory
performance. Please refer to the table below.
Memory Population Guidelines
Please follow the table below when populating the memory module on each node.
Recommended Population (Balanced)
DIMMA2
DIMMB2
DIMMA1
DIMMB1
Total System Memory
2GB DIMM
2GB DIMM
4GB
2GB DIMM
2GB DIMM
2GB DIMM
2GB DIMM
8GB
4GB DIMM
4GB DIMM
8GB
4GB DIMM
4GB DIMM
4GB DIMM
4GB DIMM
16GB
8GB DIMM
8GB DIMM
16GB
8GB DIMM
8GB DIMM
8GB DIMM
8GB DIMM
32GB
Notes:
•
Be sure to use memory modules of the same type, speed, and frequency
on the same motherboard. Mixing of memory modules of different types
and speeds may damage the motherboard.
•
Due to memory allocation to system devices, the amount of memory that
remains available for operational use will be reduced when 4 GB of RAM
is used. The reduction in memory availability is disproportional. See the
following table for details.
