Supero SuperWorkstation 7046A-6, User Manual

Page: 89 / 98

Chapter 7: BIOS
7-21
Supervisor Password
This item indicates if a Supervisor password has been entered for the system. "Not
Installed" means a Supervisor password has not been used.
User Password
This item indicates if a user password has been entered for the system. "Not In-
stalled" means that a user password has not been used.
Change Supervisor Password
Select this feature and press <Enter> to access the submenu, and then enter a
new Supervisor Password.
User Access Level (Available when Supervisor Password is set as above)
Use this feature to set the user's access level. The options are:
Full Access
•
: Select this item to grant a user a full access to the Setup Utility.
View Only: Select this item to allow the user to access the Setup Utility without
•
making changes.
Limited: Select this item to allow the user a limited access to the Setup Utility
•
and making changes. such as Date and Time
No Access: Select this item to prevent the user from accessing the Setup Util-
•
ity.
Change User Password
Select this feature and press <Enter> to access the submenu, and then enter a
new User Password.
Clear User Password (Available only if User Password has been set)
This item allows you to clear a user password after it has been entered.
Password Check
This item allows you to check a password after it has been entered. The options
are Setup and Always.
Boot Sector Virus Protection
When Enabled, the AMI BIOS displays a warning when any program (or virus) is-
sues a Disk Format command or attempts to write to the boot sector of the hard
disk drive. The options are Enabled and Disabled .