Supero SuperWorkstation 7046A-6, User Manual

Page: 3 / 98

iii
Preface
Preface
About This Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the SuperWorkstation 7046A-
6. Installation and maintenance should be performed by experienced technicians
only.
The SuperWorkstation 7046A-6 is a high-end system based on the SC743TS-
865BP-SQ tower/4U rackmount chassis and the X8DA6 serverboard.
Manual Organization
Chapter 1: Introduction
The fi rst chapter provides a checklist of the main components included with the sys-
tem and describes the main features of the X8DA6 serverboard and the SC743TS-
865BP-SQ chassis, which comprise the SuperWorkstation 7046A-6.
Chapter 2: Server Installation
This chapter describes the steps necessary to setup the SuperWorkstation 7046A-6
into a rack and check out the server confi guration prior to powering up the system. If
your system was ordered without processor and memory components, this chapter
will refer you to the appropriate sections of the manual for their installation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions and
information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Chapter 4: System Safety
You should thoroughly familiarize yourself with this chapter for a general overview
of safety precautions that should be followed when installing and servicing the
SuperWorkstation 7046A-6.