Supero SuperWorkstation 7046A-6, User Manual

Page: 40 / 98

5-8
S
uper
W
orkstation 7046A-6 User's Manual
5-6 Installing Memory Modules
Note : Check the Supermicro web site for recommended memory modules.
CAUTION
Exercise extreme care when installing or removing DIMM
modules to prevent any possible damage.
Press down the release tabs
Insert & press a DIMM into
the slot
Installing & Removing DIMMs
Insert the desired number of DIMMs into the memory 1.
slots, starting with P1-DIMM 1A. For best perfor-
mance, please use the memory modules of the same
type and speed in the memory slots as indicated on
the Memory Installation Table (below).
Press down the release tabs on the ends of a mem- 2.
ory slot. Insert each DIMM vertically into its slot. Pay
attention to the notch along the bottom of the module
to prevent inserting the DIMM incorrectly.
Gently press down on the DIMM until it snaps into 3.
place in the slot. Repeat for all modules.
Reverse the steps above to remove the DIMMs from 4.
the serverboard.
Populating Memory with One CPU (CPU1) Installed
O Branch 0 Branch 1 Branch 2
3 DIMMs P1 DIMM1A P1 DIMM2A P1 DIMM3A
6 DIMMs P1 DIMM1A P1 DIMM1B P1 DIMM2A P1 DIMM2B P1 DIMM3A P1 DIMM3B
Populating Memory with One CPU (CPU2) Installed
Branch 0 Branch 1 Branch 2
3 DIMMs P2 DIMM1A P2 DIMM2A P2 DIMM3A
6 DIMMs P2 DIMM1A P2 DIMM1B P2 DIMM2A P2 DIMM2B P2 DIMM3A P2 DIMM3B
Populating Memory with Two CPUs Installed
CPU1 CPU2
Branch 0 Branch 1 Branch 3 Branch 0 Branch 1 Branch 3
6 DIMMs 1A 2A 3A 1A 2A 3A
12
DIMMs 1A 1B 2A 2B 3A 3B 1A 1B 2A 2B 3A 3B