Supero SUPERSERVER 6027R-N3RF, User Manual

Page: 88 / 130

6-6
SUPERSERVER 6027R-N3RF/WRF USER'S MANUAL
Figure 6-6: Air Shroud in Place in the SC825LP Chassis
6-6 Drive Bay Installation/Removal
Accessing the Drive Bays
SAS/SATA Drives: You do not need to access the inside of the chassis or remove
power to replace or swap SATA drives. Proceed to the next step for instructions.
You must use standard 1" high, SATA drives in the system.
Note: Refer to the following ftp site for setup guidelines: ftp://ftp.supermicro.com/
driver/SAS/LSI/LSI_SAS_EmbMRAID_SWUG.pdf and Supermicro's web site for
additional inmformation at http://www.supermicro.com/support/manuals/
Warning: Enterprise level hard disk drives are recommended for use in
Supermicro chassis and servers. For information on recommended HDDs,
visit the Supermicro Web site at http://www.supermicro.com/products/nfo/fi les/
storage/SAS-CompList.pdf