Supero SUPERSERVER 6027R-N3RF, User Manual

Page: 3 / 130

iii
Preface
Preface
About This Manual
This manual is written for professional system integrators and PC technicians.
It provides information for the installation and use of the SuperServer
6027R-N3RF/WRF Installation and maintainance should be performed by
experienced technicians only.
The SuperServer 6027R-N3RF/WRF is a high-end server based on the
SC825TQ-R740WB 2U rackmount chassis and the X9DRW-3F/iF dual processor
serverboard. The only difference between the two server models is that the
6027R-N3RF server contains both SATA and SAS connections and the 6027R-WRF
server only has SATA connections.
Manual Organization
Chapter 1: Introduction
The fi rst chapter provides a checklist of the main components included with the
server system and describes the main features of the X9DRW-3F/iF serverboard
and the SC825TQ-R740WB chassis.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer
6027R-N3RF/WRF into a rack and check out the server confi guration prior to
powering up the system. If your server was ordered without processor and memory
components, this chapter will refer you to the appropriate sections of the manual
for their installation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions and
information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Chapter 4: System Safety
You should thoroughly familiarize yourself with this chapter for a general overview
of safety precautions that should be followed when installing and servicing the
SuperServer 6027R-N3RF/WRF.
Chapter 5: Advanced Serverboard Setup
Chapter 5 provides detailed information on the X9DRW-3F/iF serverboard,
including the locations and functions of connections, headers and jumpers. Refer
to this chapter when adding or removing processors or main memory and when
reconfi guring the serverboard.