Supero SUPERSERVER 6027R-N3RF, User Manual

Page: 94 / 130

6-12
SUPERSERVER 6027R-N3RF/WRF USER'S MANUAL
6-8 Power Supply
The SuperServer 6027R-N3RF/WRF has a 740 Watt redundant power supply
consisting of two power modules. Each power supply module has an auto-switching
capability, which enables it to automatically sense and operate at a 100V - 240V
input voltage. An amber light will be illuminated on the power supply when the
power is off. An illuminated green light indicates that the power supply is operating.
Power Supply Failure
SC825 chassis models have either one or two (redundant) power supplies. In the
unlikely event that the power supply unit fails, if you have a single power supply, the
system will shut down and you will need to replace the power supply unit. SC825
chassis models which include a redundant power supply, will allow for the power
supply to be replaced without powering down the system.
Replacement units can be ordered directly from Supermicro (see the contact
information in the Preface).
Replacing the Power Supply
1. If your chassis includes a redundant power supply (at least two power
modules), you can leave the server running and remove only one power
supply. If your server has only one power supply, you must power-down the
server and unplug the power cord before replacing the power supply.
2. Push the release tab (on the back of the power supply) as illustrated.
3. Pull the power supply out using the handle provided.
4. Replace the failed power module with the same model.
5. Push the new power supply module into the power bay until you hear a click.
6. Plug the AC power cord back into the module and power up the server.