Supero SUPERSERVER 6027R-N3RF, User Manual

Page: 85 / 130

Chapter 6: Advanced Chassis Setup
6-3
6-3 Removing the Chassis Cover
Removing the Chassis Cover
1. Remove the two screws on each side of the cover, which secure the cover to
the chassis.
2. Press the release tabs to remove the cover from the locked position. Press
both tabs at the same time.
3. Once the top cover is released from the locked position, slide the cover
toward the rear of the chassis.
4. Lift the cover off the chassis.
Warning: Except for short periods of time, do NOT operate the server without the
cover in place. The chassis cover must be in place to allow proper airfl ow and prevent
overheating.
Figure 6-2: Removing the Chassis Cover
Release Tab
Remove Screw
Remove
Screw
1
2
1
1
1
1
1
2
1
3
1
4