Supero SUPERSERVER 6027B-TLF User Manual Download Page 91

Page: 91 / 106

Chapter 7: BIOS

7-25

CPU

: TXT (Trusted Execution Technology) Feature

Chipset

: TXT (Trusted Execution Technology) Feature

Intel TXT (LT-SX) Confi guration

This feature displays the following TXT con

guration setting.

TXT (LT-SX) Support:

This item indicates if the Intel TXT support is enabled

or disabled. The default setting is

Disabled

Intel TXT (LT-SX) Dependencies

This feature displays the features that need to be enabled for the Intel Trusted
Execution Technology to work properly in the system.

VT-d Support

: Intel Virtualization Technology with Direct I/O support

VT Support

: Intel Virtualization Technology support

TPM Support

: Trusted Platform support

TPM State

: Trusted Platform state

ME Subsystem

This feature displays the following ME Subsystem Con

guration settings.

•

ME BIOS Interface Version

•

ME Version

Summary of Contents for SUPERSERVER 6027B-TLF











































































































Search results

Summary of Contents for SUPERSERVER 6027B-TLF

Reviews:

Related manuals for SUPERSERVER 6027B-TLF

Brands by name

Popular brands

Supero SUPERSERVER 6027B-TLF, User Manual

Search results

Summary of Contents for SUPERSERVER 6027B-TLF

Reviews:

Related manuals for SUPERSERVER 6027B-TLF

Brands by name

Popular brands