Supero SUPERSERVER 6027B-TLF, User Manual

Page: 44 / 106

5-14
S
UPER
S
ERVER 6027B-TLF User's Manual
NIC1/NIC2 (LAN1/LAN2)
The NIC (Network Interface Controller)
LED connection for LAN port 1 is located
on pins 11 and 12 of JF1, and the LED
connection for LAN Port 2 is on Pins 9
and 10. NIC1 LED and NIC2 LED are
2-pin NIC LED headers. Attach NIC LED
cables to NIC1 LED and NIC2 LED to
display network activities for LAN 1 and
LAN2. Refer to the table on the right for
pin de
fi nitions.
LAN1/LAN2 LED
Pin Defi nitions (JF1)
Pin# De fi nition
9/11 Vcc
10/12 Ground
Overheat (OH)/Fan Fail/Front UID
LED
Connect an LED cable to the Front UID
and OH/Fan Fail connections on pins
7 and 8 of JF1. The red LED on pin 7
provides warnings of overheat, fan fail-
ure or power failure. The blue LED on
pin 8 works as the front panel UID LED
indicator. The red LED takes precedence
over the blue LED by default. Refer to
the table on the right for pin de
fi nitions.
OH/Fan Fail Indicator Status
State De fi nition
Off Normal
On Overheat
Flashing Fan Fail
Reset Button
The Reset Button connection is located
on pins 3 and 4 of JF1. Attach it to a the
hardware Reset Button on the computer
case. Refer to the table on the right for
pin de
fi nitions.
Reset Button
Pin Defi nitions (JF1)
Pin# De fi nition
3 Reset
4 Ground
Power Fail LED
The Power Fail LED connection is located
on pins 5 and 6 of JF1. Refer to the table
on the right for pin de
fi nitions.
PWR Fail LED
Pin Defi nitions (JF1)
Pin# De fi nition
5 Vcc
6 Ground
OH/Fan Fail/ PWR Fail/Blue_UID
LED Pin Defi nitions (JF1)
Pin# De fi nition
7 Red_LED-Cathode/OH/Fan Fail/
Power Fail5.5V.SB
8 Blue_UID LED