Supero SUPERSERVER 6027B-TLF, User Manual

Page: 85 / 106

Chapter 7: BIOS
7-19
Onboard LAN Option ROM Select
Select iSCSI to use the iSCSI Option ROM to boot the computer using a network
device. Select PXE (Preboot Execution Environment) to use an PXE Option ROM
to boot the computer using a network device. The options are iSCSI and
PXE
.
Load Onboard LAN1 Option ROM/Load Onboard LAN2 Option ROM
Select Enabled to enable the onboard LAN1 Option ROM~LAN2 Option ROM. This
is to boot the computer using a network device. The default setting for LAN1 Op-
tion ROM is
Enabled
, and the default setting for LAN2 Option ROM is
Disabled
.
Load Onboard SAS Option ROM
Select Enabled to use the SAS Option ROM to boot the computer using a SAS
device. The options are
Enabled
and Disabled.
VGA Priority
This feature allows the user to select the graphics adapter to be used as the primary
boot device. The options are
Onboard
, and Offboard.
X
Super IO Confi guration
Super IO Chip:
This item displays the Super IO chip used in the motherboard.
X
Serial Port 1 Confi guration
Serial Port
Select Enabled to enable a serial port speci fi ed by the user. The options are
En-
abled
and Disabled.
Device Settings
This item displays the settings of Serial Port 1.
Change Settings
This option speci fi es the base I/O port address and the Interrupt Request address of
Serial Port 1. Select Disabled to prevent the serial port from accessing any system
resources. When this option is set to Disabled, the serial port becomes unavailable.
The options are
Auto
, IO=3F8h; IRQ=4; IO=3F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;
IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12; IO=3E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11,
12; and IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;
Device Mode
Use this feature to select the desired mode for a serial port speci fi ed. The options
are
Normal
and High Speed.