Supero SUPERSERVER 6027B-TLF, User Manual

Page: 45 / 106

Chapter 5: Advanced Serverboard Setup
5-15
Power Button
The Power Button connection is located
on pins 1 and 2 of JF1. Momentarily
contacting both pins will power on/off the
system. This button can also be con
fi g-
ured to function as a suspend button (see
BIOS Setup). To turn off the power in the
suspend mode, press the button for at
least 4 seconds. Refer to the table on the
right for pin de
fi nitions.
Power Button
Pin Defi nitions (JF1)
Pin# De fi nition
1 Signal
2 +3V Standby
Universal Serial Bus (USB)
Two Universal Serial Bus ports (USB 0/1)
are located on the I/O backpanel and an
additional four USB ports on two head-
ers, USB2/3, 4/5, provide front chassis
access. USB 6 is a Type A USB connec-
tor. (USB cables are not included). See
the tables on the right for pin de
fi nitions.
Back Panel USB0/1
Pin Defi nitions
Pin# De fi nition Pin# De fi nition
1 +5V 5 +5V
2 USB_PN1 6 USB_PN0
3 USB_PP1 7 USB_PP0
4 Ground 8 Ground
Front Accessible USB2/3, 4/5, 6
Pin Defi nitions
USB 2/4/11/12
Pin # De fi nition
USB 3/5/13
Pin # De fi nition
1 +5V 6 +5V
2 PO- 7 PO-
3 PO+ 8 PO+
4 Ground 9 Ground
5 No Con-
nection 10 Key
Serial Ports
The COM1 port is located on the I/O
backpanel. COM2 is a header located on
the the serverboard. See the table on the
right for pin de
fi nitions.
Serial Port Pin Defi nitions
(COM1/COM2)
Pin # De fi nition Pin # De fi nition
1 CDC 6 DSR
2 RXD 7 RTS
3 TXD 8 CTS
4 DTR 9 RI
5 Ground 10 NC