Supero SUPERSERVER 6026T-TF, User Manual

Page: 66 / 106

6-8
S
UPER
S
ERVER 6026T-TF Manual
DVD-ROM Drive Installation
The top cover of the chassis must be opened to gain full access to the DVD-ROM.
The 6026T-TF accomodates only slim DVD-ROM drives. Side mounting brakets are
typically needed to mount a DVD-ROM drive in the 6026T-TF server.
Installing a DVD-ROM Drive
Drives mount on rails and should "click" into place to be correctly and fully installed
in their bays. You must power down the system before installing or removing fl oppy
or IDE components.
Release the screws that secure the server unit to the rack. 1.
Grasp the two handles on either side and pull the unit straight out until it 2.
locks (you will hear a "click").
Depress the two buttons on the top of the chassis to release the top cover 3.
and at the same time, push the cover away from you until it stops. You can
then lift the top cover from the chassis to gain full access to the inside of the
server.