Supero SUPERSERVER 6026T-TF User Manual Download Page 12

Page: 12 / 106

1-4

UPER

ERVER 6026T-TF User's Manual

slots, one COM port, a VGA port, two USB 2.0 ports, PS/2 mouse and keyboard

ports and two gigabit Ethernet ports.

Cooling System

The SC823TQ-650LPB chassis has an innovative cooling design that includes four

8-cm system cooling fans. The fans plug into chassis fan connectors that are located

behind the drive bays. A "Fan Speed Control Mode" setting in BIOS allows the user

to set the chassis fan speed. If any fan fails and the ambient air temperature inside

the chassis becomes too high, an overheat LED and alarm will be activated. The

system also includes an air shroud to maximize airfl ow effi ciency.

Summary of Contents for SUPERSERVER 6026T-TF











































































































Search results

Summary of Contents for SUPERSERVER 6026T-TF

Reviews:

Related manuals for SUPERSERVER 6026T-TF

Brands by name

Popular brands

Supero SUPERSERVER 6026T-TF, User Manual

Search results

Summary of Contents for SUPERSERVER 6026T-TF

Reviews:

Related manuals for SUPERSERVER 6026T-TF

Brands by name

Popular brands