Supero SUPERSERVER 6026T-TF, User Manual

Page: 63 / 106

Chapter 6: Advanced Chassis Setup
6-5
Figure 6-3. Mounting a Drive in a Carrier
!
Important: Regardless of how many hard drives are installed, all drive car-
riers must remain in the drive bays for proper airfl ow.
Use caution when working around the SATA backplane. Do not touch the
backplane with any metal objects and make sure no ribbon cables touch
the backplane or obstruct the holes, which aid in proper airfl ow.
!
!
Enterprise level hard disk drives are recommended for use in Supermicro
chassis and servers. For information on recommended HDDs, visit the
Supermicro Web site at http://www.supermicro.com/products/nfo/fi les/
storage/SAS-1-CompList-110909.pdf
SATA Drive Installation
The SATA drives are mounted in drive carriers to simplify their installation and
removal from the chassis. Since these carriers also help promote proper airfl ow
for the drive bays, even empty carriers without drives installed must remain in the
chassis.
Mounting a SATA Drive in a Drive Carrier
To add a new hard drive, install a drive into the carrier with the printed circuit board
side toward the carrier so that the mounting holes align with those in the carrier.
Secure the drive to the carrier with four screws, as shown in Figure 6-3.