Supero SUPERSERVER 6014P-8, User Manual

Page: 3 / 126

iii
Preface
Preface
About This Manual
This manual is written for professional system integrators and PC techni-
cians. It provides information for the installation and use of the SuperServer
6014P-8/6014P-8R/6014P-82R/6014P-82. Installation and maintainance
should be performed by experienced technicians only.
The SuperServer 6014P-8/6014P-8R/6014P-82R/6014P-82 is a high-end
server based on the SC814+S-560/SC814+S-R560 1U rackmount chassis
and the Super X6DHP-8G/X6DHP-8G2 a dual processor serverboard that
supports Intel
®
Xeon
TM
processors at a Front Side (System) Bus speed of
800 MHz.
Manual Organization
Chapter 1: Introduction
The first chapter provides a checklist of the main components included with
the server system and describes the main features of the X6DHP-8G/
X6DHP-8G2 serverboard and the SC814+S-560/SC814+S-R560 chassis,
which comprise the SuperServer 6014P-8/6014P-8R/6014P-82R/6014P-82.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer
6014P-8/6014P-8R/6014P-82R/6014P-82 into a rack and check out the
server configuration prior to powering up the system. If your server was
ordered without processor and memory components, this chapter will refer
you to the appropriate sections of the manual for their installation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions
and information provided by the control panel on the chassis as well as
other LEDs located throughout the system.