Supero SUPERSERVER 6014P-8, User Manual

Page: 52 / 126

5-18
S
UPER
S
ERVER 6014P-8/6014P-8R/6014P-82R/6014P-82 User's Manual
Power LED/Speaker
On the JDI header, pins 1-3 are
for a power LED and pins 4-7 are
for the speaker. See the table on
the right for speaker pin defini-
tions.
Note: The speaker connector pins
a r e f o r u s e w i t h a n e x t e r n a l
speaker. If you wish to use the
o n b o a r d s p e a k e r , y o u s h o u l d
close pins 6-7 with a jumper.
Speaker Connector Pin
Definitions (JD1)
Pin
Number
4
5
6
7
Function
+
Key
Definition
Red wire, Speaker data
No connection
Key
Speaker data
Wake-On-Ring
The Wake-On-Ring header is des-
ignated WOR (or JWOR1). This
function allows your computer to
receive and "wake-up" by an in-
coming call to the modem when in
suspend state. See the table on
the right for pin definitions. You
must have a Wake-On-Ring card
and cable to use this feature.
Wake-on-Ring
Pin Definitions
(WOR)
Pin
Number
1
2
Definition
Ground
Wake-up
ATX PS/2 Keyboard and
PS/2 Mouse Ports
The ATX PS/2 keyboard and PS/2
mouse are located beside the VGA
port. See the table at right for pin
definitions. (See Figure 5-4 for
locations.)
PS/2 Keyboard
and Mouse Port
Pin Definitions
Pin
Number
1
2
3
4
5
6
Definition
Data
NC
Ground
VCC
Clock
NC