5-20
SuperRack User's Manual
Mounting a Vertical Plate
In order to mount a cable management trough, you may fi rst need to mount a
vertical plate onto the SuperRack's frame. Cable management troughs mounted
on rack extensions do not need to use a vertical plate since slot and peg holes are
provided on the rack extension already for them. Follow the procedure below for
mounting and unmounting a vertical plate onto the rack frame.
Mounting a Vertical Plate onto the Rack
1. Dismount any side panels that are
on the rear of the SuperRack.
2. Insert spring screw holes on all
horizontal struts in the rack's rear
side where you wish to mount the
vertical plate.
3. Mount the verical plate so that
its screw holes match the spring
screw holes on the horizontal
struts.
4. Screw in the securing screws to
secure the vertical plate to the
rack.
Unmounting a Vertical Plate from the Rack
To unmount a vertical plate from the rack, follow the previous procedure in reverse
by fi rst unscrewing its retaining screws, and then unmounting the vertical plate
from the rack.
