2-16
X9DRH-7F/-iF/-iF-NV/-7TF/-iTF Motherboard User’s Manual
2-5 Motherboard Installation
All motherboards have standard mounting holes to fit different types of chassis.
Make sure that the locations of all the mounting holes for both motherboard and
chassis match. Although a chassis may have both plastic and metal mounting fas-
teners, metal ones are highly recommended because they ground the motherboard
to the chassis. Make sure that the metal standoffs click in or are screwed in tightly.
Then use a screwdriver to secure the motherboard onto the motherboard tray.
Tools Needed
•
Phillips Screwdriver
•
Pan head screws (9 pieces)
•
Standoffs (9 pieces, if needed)
Location of Mounting Holes
There are nine (9) mounting holes on this motherboard indicated by the arrows.
Caution:
1) To avoid damaging the motherboard and its components, please do
not use a force greater than 8 lb/inch on each mounting screw during motherboard
installation. 2) Some components are very close to the mounting holes. Please take
precautionary measures to avoid damaging components when installing the moth-
erboard to the chassis.
X9DRH-7F/iF/iF-NV/7TF/iTF
Rev. 1.02
Summary of Contents for SuperO X9DRH-7F
Page 1: ...USER S MANUAL Revision 1 1 X9DRH 7F X9DRH iF X9DRH iF NV X9DRH 7TF X9DRH iTF...
Page 68: ...2 44 X9DRH 7F iF iF NV 7TF iTF Motherboard User s Manual Notes...
Page 110: ...A 2 X9DRH 7F iF iF NV 7TF iTF User s Manual Notes...
Page 114: ...B 4 X9DRH 7F iF iF NV 7TF iTF Motherboard User s Manual Notes...
