Chapter 2: Installation
2-17
Installing the Motherboard
1. Install the I/O shield into the chassis.
2. Locate the mounting holes on the motherboard.
3. Locate the matching mounting holes on the chassis. Align the mounting holes
on the motherboard with the mounting holes on the chassis.
4. Install standoffs in the chassis as needed.
5. Install the motherboard into the chassis carefully to avoid damaging mother-
board components.
6. Using the Phillips screwdriver, insert a Pan head #6 screw into a mounting
hole on the motherboard and its matching mounting hole on the chassis.
7. Repeat Step 5 to insert #6 screws into all mounting holes.
8. Make sure that the motherboard is securely placed in the chassis.
Note:
Images displayed are for illustration only. Your chassis or compo-
nents might look different from those shown in this manual.
Summary of Contents for SuperO X9DRH-7F
Page 1: ...USER S MANUAL Revision 1 1 X9DRH 7F X9DRH iF X9DRH iF NV X9DRH 7TF X9DRH iTF...
Page 68: ...2 44 X9DRH 7F iF iF NV 7TF iTF Motherboard User s Manual Notes...
Page 110: ...A 2 X9DRH 7F iF iF NV 7TF iTF User s Manual Notes...
Page 114: ...B 4 X9DRH 7F iF iF NV 7TF iTF Motherboard User s Manual Notes...
