Chapter 2: Installation
2-9
OPEN 1st
Motherboard
Screw#1
Screw#2
Installing a Passive CPU Heatsink
1. Do not apply any thermal grease to the heatsink or the CPU die -- the re-
quired amount has already been applied.
2. Place the heatsink on top of the CPU so that the four mounting holes are
aligned with those on the Motherboard's and the Heatsink Bracket under-
neath.
3. Screw in two diagonal screws (i.e., the #1 and the #2 screws) until just snug
(-do not over-tighten the screws to avoid possible damage to the CPU.)
4. Finish the installation by fully tightening all four screws.
Mounting Holes
Screw#3
Screw#4
Summary of Contents for SuperO X9DRH-7F
Page 1: ...USER S MANUAL Revision 1 1 X9DRH 7F X9DRH iF X9DRH iF NV X9DRH 7TF X9DRH iTF...
Page 68: ...2 44 X9DRH 7F iF iF NV 7TF iTF Motherboard User s Manual Notes...
Page 110: ...A 2 X9DRH 7F iF iF NV 7TF iTF User s Manual Notes...
Page 114: ...B 4 X9DRH 7F iF iF NV 7TF iTF Motherboard User s Manual Notes...
